BioCask is a top of the line domestic wastewater solution by Thermax. The innovative design of the BioCask has surpassed the limitations of a conventional wastewater treatment system. The BioCask uses the first-of-its-kind unidirectional fluidization pattern. This pattern ensures efficient oxygen usage so as to promote organic waste decomposition.
BioCask Mini : 10 KLD and above
BioCask : 50, 100, 150, 200, 250 & 300 KLD (modular units for higher capacities)
Perfect for basement installation, where height is less than 3 meters
Reduced operating costs due to high oxygen transfer efficiency
Minimal civil work
BOD < 5 mg/l without ultrafiltration
This space and power saving technology is a better alternative to conventional waste water treatment plants. FAB (Fluidized Aerobic Bioreactor Technology) offers an effective solution to water situation with constraints such as scarcity of open space, network piping issues, high power and land cost.
Prefabricated : 50,75 & 100 KLD (modular for other capacities)
On-Site Fabrication : 10 to 5000 KLD
Skid Mounted; Quick & Easy Installation
Odorless operation, with a self – regulating system
Pre-engineered; Low Cost & Fast Delivery
Achieves < 5 TSS mg/l without coagulant, flocculent
Achieves < 5 BOD mg/l without UF membranes
SeqtreaT (Sequential Batch Reactor Technology) is one of the most advance technologies developed by Thermax for wastewater treatment. Especially for domestic wastewater, SeqtreaT in a single reactor basin, its achievements are three-fold: equalization, aeration and clarification in timed sequence batch mode. Also, the cycle time can be used to suit various organic loads. Aerobic phase and controlled anoxic phase are used to reduce organic, nitrogen and phosphorus compounds.