PRESSURE BOOSTING

CM BOOSTER

features

Designed for domestic and light commercial use. Robust CM pump, a pressure switch and a pressure tank, all assembled into one unit. Installation friendly -Just plug and pump. Auto start and stop - supports demand ensuring controlled water pressure

Application

Technical Data

Flow (Q) : Max. 180 m3/h, Head(H): Max. 490m, Liquid temp : -40°c to +180°c , Max. pressure : 50 bar

CM TWIN BOOSTER

features

# 2 identical CM pumps connected in parallel on a common base frame
# Control cabinet with motor protection, controller and alternates between pumps.
# Dry run protection, built -in relay for ensuring constant and steady operation

Application

Technical Data

Flow (Q) : Max.:16.68 m3/h,
Head (H) : Max.:66.17 m

CME BOOSTER

features

# Compact and frequency (VFD) controlled booster system with pressure tank
# Pump automatically ensures constant pressure, regardless of variations in demand or inlet pressure.
# Touch screen panel supports in setting increase or decrease of water pressure.

Application

Technical Data

Flow (Q) : Max- 16m3/h,
Head (H) : Max-45m,
Liquid temp : 0°c - +60°c,
Max-pressure : 10 bar

CMBE TWIN BOOSTER

features

# Compact two-pump booster system for water supply in domestic and light commercial applications. Installation and commissioning friendly.
# Integrated speed controller ensures constant pressure, Cascade Control, Pump Alternation, Dry-run Protection.
# Ensures optimum Performance

Application

Technical Data

Flow (Q) : Max- 15 m3/h,
Head (H) : Max-68m,
Liquid temp : 0°c - +60°c ,
Max- pressure : 10 bar

SCALA 1

features

# This is a self-priming, multistage pump, which combines all the components of a pressure booster into a compact composite enclosure.
# Easy Installation and commissioning
# Can communicate with Grundfos GO Remote app through a built-in Bluetooth technology, which enables high customization options, making this pump a good fit for every application.
# A self-priming pump ensures a stable operation, even if the pump is not fully filled with liquid.
# It has a features of Dry-run protection, Anti-cycling function, Maximum runtime, Water on demand, Low noise level < 55 dB.

Application

SCALA 1 TWIN BOOSTER

features

# This can be easily setup as a twin booster for use as standby pump or for higher flow demand
# Accessories required: Base plate, Inlet and outlet manifold with valves, communication cable, fixing screws
# Ease installation, Alternate on runtime / on the number of starts
# Can be connected to Grundfos GO Remote via Bluetooth communication to be able to adjust the system parameters to specific user needs.
# Dry - run protection will stop each pump separately.

Application

SCALA 2

features

# Perfect water pressure - in all taps at all times
# Low noise
# Compact
# Robust and reliable
# Easy installation and self-priming
# Energy efficient

Application

Technical Data

Flow (Q) : Max.: 4.9 m3/h,
Head (H) : Max.45m,
Liquid temp : 0°c to +45°c,
Max. pressure : 10 bar

UPA

features

# Designed for pressure boosting of domestic water supplied from an external source from residential homes.
# The pump increases the pressure so that the required pressure is available at showers, taps and similar tapping points for domestic water
# These pumps are used in open systems and can also be connected directly to the water main/ Individual Bathrooms/ Individual Taps.
# High comfort- very low noise, High energy efficiency-low energy bill
# Maximum reliability and robustness, Easy Installation

Application

Technical Data

Flow (Q): Max- 15 m3/h, Head (H): Max-68m, Liquid temp: 0°c - +60°c , Max- pressure: 10 bar

CIRCULATION PUMP

CM

features

# These pumps are horizontal end suction, noiseless, reliable ss internals. It has been created with compactness and modularity as two of its central features.
# These pumps are is basically composed of a series of interchangeable modules, all of which have been designed to work together seamlessly for many applications.

Application

Technical Data

Flow (Q): Max- 15 m3/h, Head (H): Max-68m, Liquid temp: 0°c - +60°c , Max- pressure: 10 bar

MAGNA 3

features

# This pump has a permanent magnet motor that will fit both heating, cooling and domestic hot water circulation.
# Best Efficiency to reduce energy cost.
# High Intelligence - The new FLOWLIMIT and FLOWADAPT functions along with the renowned AUTOADAPT enable complete system control.
# Easy Installation
# Versatile Application make it suitable for both heating and cooling projects
# Easy integration for building management systems

Application

Technical Data

Flow (Q): Max.: 4.9 m3/h, Head (H): Max.45m, Liquid temp: 0°c to +45°c, Max. pressure: 10 bar

CONTROL PANELS

GIDPC - 1

features

# Digital pump controller, programmable device for single phase pumps upto 15 A.

Application

Technical Data

Flow (Q): Max- 15 m3/h, Head (H): Max-68m, Liquid temp: 0°c - +60°c , Max- pressure: 10 bar

GDPPC - 2

features

# Digital pump controller, programmable device for single phase pumps for single pump and two pumps 1.5 to 16 A each.

Application

Technical Data

Flow (Q): Max- 15 m3/h, Head (H): Max-68m, Liquid temp: 0°c - +60°c , Max- pressure: 10 bar

GIDPC - 3

features

# Digital pump controller, programmable device for Three phase pumps for single pump and two pumps 1.5 to 16 A each.

Application

Technical Data

Flow (Q): Max- 15 m3/h, Head (H): Max-68m, Liquid temp: 0°c - +60°c , Max- pressure: 10 bar

WATER TRANSFER AND DRAINAGE PUMPS

SB HF

features

# High reliability - The pump is built from stainless-steel materials resistant to corrosion
# The double mechanical shaft seal ensures trouble free operation
# Integrated protection - Built-in thermal protection immediately stops the pump in the case of over-heating. The pump automatically restarts when it has returned to the normal temperature.

Application

Technical Data

Flow (Q): Max- 15 m3/h, Head (H): Max-68m, Liquid temp: 0°c - +60°c , Max- pressure: 10 bar

SP

features

# These are stainless-steel pumps, Robust and corrosion resistant, Long life even in rough condition and they are available in 3 material grades.
# The pumps are suitable for boreholes in sizes ranging from 4" over 6" and 8" to 10".
# Bearings with sand channels - All bearings are water-lubricated and are squared shape enabling sand particles.
# The pump is mounted with an inlet strainer and have a built-in non-return valve.

Application

Technical Data

Flow (Q): Max- 15 m3/h, Head (H): Max-68m, Liquid temp: 0°c - +60°c , Max- pressure: 10 bar

SMART SUB

features

# These pumps are designed for under water application and therefore there is no need for priming or a foot valve.
# Carbon Radial bush bearing, SS Thrust bearing and Carbon pads at both Drive End and Non-drive End to take care of axial thrust load.
# The Anticorrosive coating on the Cast Iron parts - free from rust and corrosion.
# Winding overhang protector.
# Neck ring in the volute casing - High efficiency
# Supplied with Starter Box for 1 phase Pumps

Application

Technical Data

Flow (Q): Max- 15 m3/h, Head (H): Max-68m, Liquid temp: 0°c - +60°c , Max- pressure: 10 bar

SEG

features

# The high discharge pressure enables transfer of wastewater over longer distances.
# In areas with no sewer systems or where gravitation systems are unsuitable, these pumps can transfer wastewater to the sewer mains.
# Enhanced reliability
# Highly effective grinder system enables smaller pressure pipes.
# SmartTrim system maintains high pressure by simple adjusting the impeller clearance
# Highly effective grinder Effective cutting by a highly reliable, patented grinder.

Application

Technical Data

Flow (Q): Max- 15 m3/h, Head (H): Max-68m, Liquid temp: 0°c - +60°c , Max- pressure: 10 bar

KPC

features

# These pumps are automatically operated fixed applications in domestic use, draining basements and garages which are subject to Flooding.
# Easy-to-handle form makes it a portable pump for emergencies such as lifting water from tanks or rivers, emptying swimming pools, fountains, excavations and underpasses. Ideal for gardening and fish pond.
# Available with automatic Level switch that turns the pump on and off as the water level rises or falls.
# The pump is supplied with an adapter and a non-return valve to prevent backflow through the pump when it stops.
# No additional motor protection is required because the single – phase version is effectively protected against any accidental over load by built-in thermal protection.

Application

Technical Data

Flow (Q): Max- 15 m3/h, Head (H): Max-68m, Liquid temp: 0°c - +60°c , Max- pressure: 10 bar

UNILIFT AP/KP

features

# Stainless steel drainage pump, compact in design with hermetically sealed stator housing (canned motor).
# An optional non return valve can be fitted in the outlet in order to prevent backflow when the pump stops operating.
# The material of the pump ensure excellent corrosion resistance.
# No additional motor protection is required because the single – phase version is effectively protected against any accidental over load by built - in thermal protection.
# Handy and easy to transport.
# The pumps are available with float switches for automatic on/off operation.

Application

Technical Data

Flow (Q): Max- 15 m3/h, Head (H): Max-68m, Liquid temp: 0°c - +60°c , Max- pressure: 10 bar

Storm water, Sewage, Booster sets, Rainwater reuse, Irrigation

SOLOLIFT 2

features

# It is a unique range of compact macerators, enabling drainage of any domestic sanitary appliance without worrying about the location of the existing gravity drain system.
# It contains collection tank which will dispose the waste water from the extra bathrooms even away from drainage stack.
# It has an option for connecting kitchen drainage.
# Robustness and operational reliability - Powerful motors with strong starting torque for professional cutter. Hot water resistant components up to 90°C for 30 minutes, Pressure tight tanks withstanding up to 2.5m water column, Accessories for outstanding safety like add-on alarm devices.
# Easy installation and replacementf.
# Maintenance and service friendly.

Application

Technical Data

Flow (Q): Max- 15 m3/h, Head (H): Max-68m, Liquid temp: 0°c - +60°c , Max- pressure: 10 bar

MULTILIFT

features

# This pump consists of a dry installed pump collecting tank, level sensor, wired controller and a non-return valve, which are ready for installation and fully automatic, low-noise operation.
# Easy to operate.
# Overload protection - If the motor is overloaded, it will stop automatically.

Application

Technical Data

Flow (Q): Max- 15 m3/h, Head (H): Max-68m, Liquid temp: 0°c - +60°c , Max- pressure: 10 bar

Accessories

Pressure Tank

Float Switch

Pressure Gauge

Pressure Switch

Valves